Milling Made Easy

Milling Made Easy

Automated Warrior Swing-blade Sawmill

 Complete Warrior sawmill.

Now offered with the new 2018 frame and beam design. Complete frame has been re-engineered to offer an extremely rigid and versatile system.

Includes: 

  • Electric start.

  • jockey transport wheels.

  • 1 x 4-tooth INSERT blade, tool, extra tips and sharpener.

  • Power feed.

  • Auto remote blade swing.

  • Operable in both auto and manual mode.

Specs:

  • Single end vertical and horizontal sizing.

  • Log setup taper alignment included.

  • 1.3m diameter (4 foot) log - although any diameter may be sawn.

  • 6m (20ft) log cut length.

  • Double cut capable.

Pricing:

Petrol power plant (inc GST):

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $27,000 AUS.

  • Model 10 (10" x 10" standard cut, 9" x 20" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $30,000 AUS.

  • Model 12 (12" x 12" standard cut, 11" x 24" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $38,000 AUS.

  • Model 12HD (12" x 12" standard cut, 11" x 24" double cut), fitted with Kohler 37hp (gross) engine. $52,000 AUS.

    • NEW Model 12HD

      • Can be upgraded to PLC computer setworks. $10,000 AUS.

      • Warrior ‘heavy duty’ frame with canti-levered beam.

      • Heavy duty drive train installed.

      • Extend to very long lengths.

      • Board return system included standard.

Electric power plant (inc GST):

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with 3-phase electric 15hp motor and soft start. $29,000.

  • Model 10 (10" x 10" standard cut, 9" x 20" double cut), fitted with 3-phase electric 15hp motor and soft start. $32,000.

  • Model 12 (12" x 12" standard cut, 11" x 24" double cut), fitted 3-phase electric 20hp motor and soft start. $40,000 AUS.

  • Model 12HD (12" x 12" standard cut, 11" x 24" double cut), fitted 3-phase electric 30hp motor and soft start. $50,000 AUS.

    • NEW Model 12HD

      • Can be upgraded to PLC computer setworks. $10,000 AUS.

      • Warrior ‘heavy duty’ frame with canti-levered beam.

      • Heavy duty drive train installed.

      • Extend to very long lengths.

      • Board return system included standard.

Diesel power plant (inc GST):

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $35,000 AUS.

  • Model 10 (10" x 10" standard cut, 9" x 20" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $38,000 AUS.

  • Model 12 (12" x 12" standard cut, 11" x 24" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $46,000 AUS.

  • Model 12HD (12" x 12" standard cut, 11" x 24" double cut), fitted with Kubota Diesel 42hp (net) turbo V1505 engine. $56,000 AUS.

    • NEW Model 12HD

      • Can be upgraded to PLC computer setworks. $10,000 AUS.

      • Warrior ‘heavy duty’ frame with canti-levered beam.

      • Heavy duty drive train installed.

      • Extend to very long lengths.

      • Board return system included standard.

NEW 2019 M12HD-42A

 

What makes our mills stand out?

  • Open access to load your logs and remove timber (without the possibility of damaging your tracks. You're not stuck in a portal restricting your options.

  • The mono rail means you're mill will always pull straight - its not dependent on how or where you pull. It will cut straight no matter what.

  • Our mills now have a 40hp capacity heavy duty Curtis gearbox (made in the US). The driven pulley is also mounted on the other side of an outrigger bearing - meaning the pressure provided by the belt is off the gearbox. This is the number one fault with most swing blade sawmills.

  • We have full taper ability along with single end sizing, making our mills very easy to align to the log and to set you're sizes.

  • The swing apparatus is effortless. We also have weather board options available to coincide with its simplicity.

  • All our mills have the ability to double cut straight off the log - no turning the mill around (its designed into the concept). Our mills don't require any 180 degree swing function - this facility has no relationship to any extra ability regarding double cutting.

  • Portability. Our mills can be provided with a simple dolly trailer system. They can also be transported via a small jockey arrangement optional with the sawmill. They do break down too. Lots of options for easy 10-30 minute setup/breakdown.

  • A major hidden advantage with our saw is that there is no need to start vertical first followed by horizontal as your finishing cut. Simply start horizontal and finish with vertical - no wedging required. Just grab your cut timber and start again.

  • Sharpening takes literally seconds with our simple 6-tooth saw blade. This design means our mills put LESS strain on the blade prolonging the life of your gearbox, bearings and belts.

  • We have thin-kerf, slabber and planer blade attachments available for all mills.

  • Saw any diameter logs.

  • Price, production, simplicity and portability - you cant beat it!